Dry Rot Repair

Dry rot which is known as the Serpula lachrymans is the wood destroying fungus that is very commonly found. Dry rots attack wood. Identifying the cause of wood decay is essential. One has to know the cause for wood decay. It may be due to the wood destroying fungus known as the wet rot or due the dry rot. The dry rot can spread as very faster pace throughout the building. Hence, measures have to taken to prevent the dry rot entry into the buildings.

The indication and identification

Indications of dry rot are Wood shrinks, darkens and cracks in a cubical manner, A silky grey mushroom colored skin frequently tinged with patches of lilac and yellow often present under less humid conditions. Rust colored spores dust frequently seen on the fruits. An active decay leaves a musty damp odor. Dry rot can infect only on the damp timber. This dampness in the wood can be due to any reason, like building leakage, leaking washing machines, shower trays and condensation. Dampness can come from outside that is from leaking roof, dampness penetrating through the roofs. Indication of the source of dampness is essential to control the dry rot. The timber cannot remain dry always for a long time hence secondary measures have to taken to prevent this.

What is the remedy for dry rot?

Any infected timber should be removed or replaced with pre-heated timber. When the wood is wet and badly decayed or there is a large hollow space that must be filled then all you have to do is remove the outer surface of the wood and treat the part of the log exposed by removing the face with CPES. After scooping away the wet, decayed wood with a kerosene blow dryer. Next applying the CPES to the interior portion of the log. Apply until the wood will accept no more. Allow the solvents to evaporate and the epoxy to cure. Fill the holes with some pieces of wood that have had the rot protection treatment. Then one has to apply the layup and laminating Resin to cut log surface and replacement piece. Apply the finish coating choose as long as it contains the UV inhibitor. CPES flows and hardens any soft wood it encounters. It virtually eliminates the future possibility of rot and deterioration inside the log. The liquid epoxy will penetrate into the areas. Drill the honey comb pattern holes to help the epoxy penetrate throughout the decayed area. There is Miniwax wood Harder, Bondo epoxy putty which is used for the dry rot repair.

You might be interested in these posts as well:

1. Dry Rot Home Repair - The dry rot fungus, Serpula lacrymans, is often regarded as the 'cancer' of a building. Many myths have built up...
2. Dry Rot Wood - Wood rot The minute microscopic organisms that change the color of the wood and they belong to a huge group...
3. What Is Dry Rot - Dry rot is a fungus that is better known as building cancer. They rampage through buildings and quickly destroy any...
4. Dry Rot Fungus - Dry rot is a fungal disease that attacks all kinds of wood that is soft wood and hard wood. It...
5. Causes Of Dry Rot - Dry rot is a kind of fungus that affects both hard wood as well as soft wood timber. It destructs...